Rear shock help

[Maa]

Sup I have a ? so I got my swinger extended 3"
and my rear shock is to short anyone else run
into this what should I do obviously get a longer one
I know but any suggestions

 

[blasterdemon7]

The shock mount should of been relocated when it was done.

 

[blasterBruce]

Yeap What BD7 Said , The shock Location Should have came into play before getting the Swing arm Extended , Good Luck With it And Welcome To The Site , Take Some Pics and Start a Build Thread !!

 

[Maa]

Alright I can do that

 

[Maa]

theres not another shock I can get that would be
A little longer

 

[blasterBruce]

I'm sure there is , But think about it , If you moved the Shock location the shock will be at an Extreme angle and Probably wont do its job Correctly !

 

[speedemon17]

no it would do its job fine it would just be either softer or stiffer thus the wishbone effect when they use a striaghter shocks up and down instead of a angle

 

[Maa]

Yeh very true the geometry wouldn't b right

 

[speedemon17]

yes o yes it would be the geometry does not change the shock does its job no matter where it is put but it shall be stiffer if moved up and softer if moved back

 

[Maa]

I see what ur sayin hanks a lot guys its good to get other
info on things

 

[speedemon17]

i wouldnt suggest changing but it is still a possibility

 

[Maa]

I see what ur sayin hanks a lot guys its good to get other
info on things

She'll either go or she'll blow