Rear Hydraulic Brake Setup..

[tas-motorsports]

Hi Guys,

A fellow on here mentioned to us Yesterday afternoon to look into a Rear Hydraulic Brake Setup for our '96 Blaster..

Is there a Setup that came stock on other models that is Preferred and easiest to Put on the Blaster rear?

Will we need to custom fab any special mounts and such?

We've really enjoyed our Blaster, its as much fun as our Raptor, Warrior, and DRZ110 Hopped-Up Pitbike, were always looking for Mods!

Take Care,

Mathew

 

[ron89]

u could mount them up .. if the warrior carer willw ork with the blsty axle then it would work, if not you could make amount that bolts up were your stock cailper bolts up to. and you would need to weld on a tab for the master cylinder to work .. i think u would be able to get the foot pedal to work off the warrior ..

 

[tas-motorsports]

Alrighty..

I figured we'd need to Fab up a mount or 2 for the Master Cylinder, but we can also fab up a mount to make the Caliper from lets say a Warrior work with my stock rear End? The Rear Disc and such I'm currently using should be fine??

Thanks for your time!

Mathew

 

[ron89]

yeaa that should work fine.

 

[tas-motorsports]

Great Deal, Thanks for your help!

We'll start keeping our Eyes Open for a Complete Rear Brake setup from a Warrior..

We mostly Trail Ride with a few other Quad folks around here, and this fellas rear Brakes can irritate the folks in front of you if your not careful on a few inclines.. :">

Have a Super Week!

Mathew

 

[ron89]

ahhh np glade i could help .. pm black--blaster he has a rear cailper/master cylinder and a front brake hydro set up off a blaster he said he would sell for 100+ship .. i can forward the pics to ya if you want ?..i would buy them but i am broke lol..

 

[woodwardspecialties]

we have a complete 03 blaster rear brake setup on ebay.

complete carrier, with new bearings and seals installed... as well as new pads in the caliper... you just need to install the carrier, and make mounts for your master cyl...

 

[tas-motorsports]

Thanks for all of your help Guys!

We'll keep all of your offers in mind for the Rear Brake setup, we've got a few other items in mind to fix up first such as a muffler..

You guys have been Great!

Mathew