Rear Brake Master Bracket

[DirtDiggler]

I made a bolt on bracket for my rear master , Its bolted to one of the stock mounting points on the frame , I did weld a bracket onto the frame above it for the resi , I still need to grind off the excess ( hence the 3 holes drilled near the top) I used a piece of bracket left over from my shanved handles kit off my truck .

 

[justtwistit]

AWESOME JOB! rep given

 

[DirtDiggler]

Thanks Bro , I'll post a couple pics of the reservoir and my gsxr bracket , Thanks for the Rep!!

 

[Mborso1029]

need a production of these...i need bolt on brackets for both master cy and rezi...somone needs to come up with both

 

[justtwistit]

Thanks Bro , I'll post a couple pics of the reservoir and my gsxr bracket , Thanks for the Rep!!

no problem! i almost went with for the gsxr set up but ended up with a complete banshee rear set up for a better deal then what it would have cost to get just a gsxr master and caliper

 

[DUALSTROKE]

Looks good let's see some close up larger pics.Not bashing here at all but make sure your brake pedal will put the right angle on the master cylinder.To me it looks like you will have to shift the top of the master a little bit to make the master perform correct.You may have it all planned out.Again not bashing just trying to save you some headaches.When I made mine everything got me mad until it was perfect for me.Nice job,and good luck.

 

[yb200]

if anyone needs brackets get hooked up from awk he will do ya right

 

[DirtDiggler]

I still have the fine tuning to do , i need to get off the stick and finish my extended swingarm so I can order the right length rear brake line . I'm going +5" for the swinger , and Ordered +3+1 A Arms , by the time its done I think its gonna ride ( and stop ) pretty nice