Quick tors question

[BigDeal]

First off been reading on this site for a few years. Tons of great info. You guys know your stuff. Here is my question. Just picked up a 1998 blaster. This evening I followed the step by step thread on here to disconnect the tors. I’m wondering if it will affect my idle now that it is discounted. I didn’t cut any wires. Thanks for all the great info guys.

 

[blasterbuddy200]

it shouldnt, as long as you disconnected the right wires, i disconnected mine and didnt bother it one bit

 

[BLAST-IT]

if you have any problems with your idle you can adjust the cable at the thumb lever to achieve your idle

 

[BigDeal]

Thanks for the info guys

 

[blasterbuddy200]

if you have any problems with your idle you can adjust the cable at the thumb lever to achieve your idle

you mean the idle screw ontop of the tors box on top of the carb under the seat........

 

[BigDeal]

Ya idk bout adjusting it at the throttle. Just wanted to make sure with the tors deleted the idle would still be ok.

 

[BLAST-IT]

i have the tors disconnected on mine with the tors cap still on and adjusted at the thumb lever and mine works fine. the screw on my tors box wasnt doing anything for my idle. i have a tors delete cap on the way and will tap the carb for idle screw when everything arrives

 

[davenichole]

if you still have the tors box on top of your carb, removing anything else tors will not affect your idle in anyway, unless you did something wrong. i removed both tors switches, one at the thumb throttle and one in the tors box on the carb and also removed all tors wires. i also removed all brake light wires and oil tank wires from the harness. i do plan on removing the tors box at some point. i know that i would rather have a idle screw with a spring behind it instead of that nut that needs loosened anytime you want to adjust the idle.