Question !! on banshee rebuild !!

[calcium12]

ok, so i started my banshee rebuild and i have a few questions:
(it would be helpful to number your answers in the reply)

1. The nuts that hold on the wheel are really hard to get off, any tips ?
2. The front rims on my banshee say ITP, is this stock ?
3. The front tires say DOMINATOR, is this stock?
4. The back tires say PRO-LITES KENDA KLAWS (think thats spelled right), are those stock?
5. I am noticing that the some/alot of bolts are rusted/stripped, so what bolt kit do you recommend and what should i be looking for (grade, material)

Note: I am doing a budget rebuild, because i have a yz125 on the way and maybe be a lt500r.

I will try and remember to take pics as i make progress, for the forum. I:I
Thanks, guys for the help.

Best Regards,
Steven

 

[yamahaman126]

1. Use an impact or get a breaker bar. Then shouldn't be that tight.
2. NO
3. NO
4. NO
5.Get on ebay and buy a bolt kit that's about the easiest.

 

[245stroker]

1) breaker bar
2) no
3) no
4) no
5) bolt kit off of ebay, stainless allen heads

 

[calcium12]

ohh...sweet i have aftermarket rims/tires....the seller of the shee never knew that, I thought ITPs were aftermarket

 

[calcium12]

6. how many piece bolt kit ??

 

[blasterfreek30]

lol

1. a big bar
2. no
3. no
4. no
5. ebay bolt kit

......how original lol

 

[yamahaman126]

6. A bunch or as many as it takes, just search banshee bolt kit

http://shop.ebay.com/?_from=R40&_tr...kw=banshee+bolt+kit&_sacat=See-All-Categories

 

[245stroker]

6. how many piece bolt kit ??

They make an engine bolt kit and a couple bolt kit to replace almost evey bolt on the quad. Depends on what you want to replace. Search ebay

 

[370]

the complete bolt kit does not include teh swingarms bolt, upper a arm bolts, foot peg bolts, and the lower linkage bolt with teh grease zerk in it... but i know where you can get a solid stainless swingarm bolt..