Question about extended A-Arms.

[Astral]

If I got a rear banshee axle set-up which would be a better length, +2+1 or +3+1? Or some other length? What I want is the back and the front to match basically B).

 

[Stanimal]

ive read the banshee rear is 3 3/4"wider i believe. but you also need to consider if your getting banshee hubs and using banshee wheels or not. Banshee wheels use another 1" offset over blaster wheels. so total with banshee hubs and wheels if im correct about the axle is 5 3/4 inches wider. So with banshee hubs 3" arms for 6" overall width would be best, and with stock rear hubs and wheels 2" for 4" overall width would be best. another thing to consider is if you flipped your front wheels or have aftermarket or stock wheels. i have asr 3+1 front a arms, itp offset front wheels a dominator axle set at +7 and banshee hubs with banshee offset itp rear wheels. with this setup my rear is 1" wider then front.

 

[Astral]

Yeah, I would use banshee hubs and rims(but stock blasty brakes 05 yr*) for both front and rear with at least 20" at most 22" tires if that matters. So ASR +3+1 sounds like a good way to go then?

*(IDK if that matters)

 

[Stanimal]

yeah id go with the 3+ personally. i just got mine and havent ridden much but love them.