pwk 28mm jeting

[brianfulcher15]

ok, so what jetting am i looking at with this carb.

specs

vforce 3
3/8" spacer
.2 bored
fmf fatty
powercore 2

 

[brianfulcher15]

from what im seeing on here its sounding like a 45/145

 

[brandoz28]

see if this will do you any good
http://www.blasterforum.com/engine-13/what-jets-you-using-28981/

 

[brianfulcher15]

yea i looked through that thread, thats wehre i got my numbers from, but i have yet to find anyone using the vforce reeds. I was wondering if they would make enough difference to need bigger jets.

I dont know if i'll ned my spacer anymore, with the 28mm. but i probally will since the 30 mm is suposed to be just like a 28

 

[darederek]

vforces dont really affect jetting. also you shouldnt have needed a spacer with a 30?????

 

[brianfulcher15]

vforces dont really affect jetting. also you shouldnt have needed a spacer with a 30?????

the bowl was hiting the clutch arm.

 

[darederek]

i havent heard of a 30 having trouble with that... but any reason why you are going down in size

 

[brianfulcher15]

i havent heard of a 30 having trouble with that... but any reason why you are going down in size

couldent get the 30mm right, and i dont have enough mods to really support a 33-35mm.

 

[fox396]

i have the same problem with my 28mm the clutch arm hits the bowl but i just turn the carb until it clears

 

[brandoz28]

i also have to turn my OKO to clear the clutch arm, the 28 will be the same problem

 

[brianfulcher15]

i thought it was bad to do that.

 

[brianfulcher15]

hey guys, is the outer diameter of the intake side teh same on the 30mm and 28mm?