Problems.... Help!

[MarkMRS4]

Hi there,

Need your kind help again guys.

Was out quad biking for hours in muddy rainy conditions, came in for a stop and turned off for about 15-20mins.

Kicked her back up and this happened...

Quad 'rev limiter' noise - YouTube

Totally cluless!

Any help would be appreciated

Mark

 

[blasterdemon7]

If you still have the TORS, that may be your problem.

 

[Herpderplol]

PARKING BRAKE it looks like !!

On the clutch side, theres the big bricky thing thats the "parking brake". You need to pull out the switch on the top of it, and follow the wires under the hood an unplug it there I:I

Also do this -> http://www.blasterforum.com/do-yourself-20/03-06-tors-removal-diy-41973/

When you have time, you can do this (not needed) -> http://www.blasterforum.com/do-yourself-20/aftermarket-carburetor-cap-idle-screw-install-22174/

 

[MarkMRS4]

PARKING BRAKE it

Bingo! I had just changed the pads and left it unhooked cause the parss wer real tight, musta just came half on!!

Thanks for your help mate!

If i knew how to give rep i would! Lol

Mark

 

[Herpderplol]

Bingo! I had just changed the pads and left it unhooked cause the parss wer real tight, musta just came half on!!

Thanks for your help mate!

If i knew how to give rep i would! Lol

Mark

Lol, you arnt the only one! when i bought my first one, we changed the pads and left it unhooked! We had to take it in lol


Rep is on the bottom left of each post, theres 3 little boxes, its the middle one with a yellow circle. For future reference.

 

[MarkMRS4]

Lol! Thanks mate!

Had to sand the new pads down. Real tight fit! Nightmare.

Glad its fixed now!