pretty cool

[89blaster89]

ok so yesterday i was reading my clymer manual and i saw in the back note section it said april 2006 installed wiseco piston and ring and 68 mm bore im guessing the guy that i bought it off wrote that in there.. does that mean it got a pretty good power gain from that? and also whats the stock bore size for a blaster?

 

[Awk08]

negligable power gains from adding the few extra cc's
now that cylinder is past 1/2 life, treat her well !!!!

 

[blasterdemon7]

Like said, no power gain from over boring. The only power gain from it is from having a fresh bore with good compression over the worn out old bore.

 

[89blaster89]

negligable power gains from adding the few extra cc's
now that cylinder is past 1/2 life, treat her well !!!!

ok so when do you think i should rebore again, considering i dont ride it that often.

 

[Larry's Shee]

Well it's been six years already. IT ALL DEPENDS ON MAINTENACE AND CARE. pLUS YOU WON'T KNOW if it's been bored since then. Do a compression test now to see how healthy it is, then you'll have a benchmark to reference to determin when it needs freshening up. With any luck it will only need rings at that time.

Sorry , cap lock :-[