pressure washing after riding??

[blasterdad]

Be very careful power washing your engine hot or cold, it can & will blow out gaskets if you hold the wand too close... Hold it back far enough to just spray off the dirt & you should be OK.

 

[choda1991]

oh ok, whats the lenghtn of a shee axle?? i know i have the banshee hubs but idk about the axle..

 

[Blaaster]

Shee axles are about 3 3/4" wider than stock Blaster's. Will fit right up, I do not think any mods are needed.

 

[choda1991]

so their noticably wider then? not just one or 2 inches wider

 

[jlsparky7]

Definitely noticeable...

 

[Blaaster]

If you can pick up a +4 Shee that's really noticeable but a bit too wide for trails and woods I think. Excellent for MX here as the rules in Aussie only let us go to 1270mm, one needs no spacers.

 

[choda1991]

oh ok. so what do you think would be better a stock shee axle or a g force extendable axle for the blasty?

 

[Blaaster]

Stock Shee is a cheaper option, if you have the biccies go for the G force andyou have the option of choosing variable widths depending on your application.

 

[choda1991]

so would a 2 inch extended banshee axle bolt right up to the blasty?? ebay has a 2 inch intended axle for the banshee that measures 38.5 inches in total length?? would that be too long?

 

[Blaaster]

The length will not affect the fit up only the overall width of the bike. Shee axles are an easy fit up no mods are needed, they slip right in. If one is careful and the brake is applied the stock axle can be slipped out and the new one slipped back in without any dismantling.