pressure washing after riding??
- Thread starter choda1991
- Start date
I dought its good on it i have done it but i try to let it cool off or let hit it with a light mist tell it cools off a lil then go at it.
Not a smart idea to instantly cool any metal. At least let it cool down some if you are desperate to get the crud off.
Its called a right bend pipe Its made by lrd but they dont make this exact pipe any more but they do make a very similar pipe like f7 or dynoport look em up heard very very good things about them both.
Yeah pipes get pretty pricey i bought mine used since they dont even make lrd anymore. But if you search around for awhile you can find a nice used f7 even check your local craigslist or ebay. Toomey i have heard is really good. But is not a right bend
The odd puddle should not cause problems, its not a great idea to cool any engine unevenly such as with a hose or pressure washer.
As in warm up, allows metals to expand evenly, cool down should be done evenly as well. Uneven expansion/contraction places undue stress on components.
As in warm up, allows metals to expand evenly, cool down should be done evenly as well. Uneven expansion/contraction places undue stress on components.
yea i know all noise and no go lol. but it gets me by for now. =] and i stand at least 2 to 3 feet back when i do pressure wash it. buy i do get up close when it comes time to pressure wash the rear end bc i dont want water getting down in the exhaust and to the motor since it doesnt have valves to keep water out of the cylinder you know
Similar threads
