port and polish
- Thread starter gwatt5
- Start date
Yes it is if the right person does it , and knows what type of port work you want done , Best thing to do is read and ask questions !
Well there is at least 2 that i am aware of , A aggressive Trail port , Or Full out Dune- Drag port
ok i have stage two reeds i was thinkign about gettin v force after prot anf polish would it make a difference or should i jusy stick with the reeds i have now
Search on the Cr125 reed cage upgrade , who ever you have the port done by should be able to mod the intake for the larger reed cage !
Yes it flows Allot more than a stock reed cage with upgraded reeds , could go with the Vforce3 as the new Vforce4 Just came out and are pricey and no real study on them yet !
didnt know there were v force 4 might look into them. so if i got cr125 reeds do i judt throw them into my blaster or do i gotts switch stuff
You have to modify the intake area , you have to remove material from the reed area , not for the faint of heart , you could take too much material off and blow through the intake area !
Very little, if any more power is made by fitting better reeds.
Reeds will make it snappier and increase the throttle response.
For a cheaper option than porting, investigate a re chambered head, or both head and porting for even more power.
Reeds will make it snappier and increase the throttle response.
For a cheaper option than porting, investigate a re chambered head, or both head and porting for even more power.
