PLUG keeps fouling and now wont start!!!

[ruairiyblaster]

You need to buy a 270 280 290 300 jet, take the snorkel of your airbox lid or drill a few holes in the lid also check you have a good clean air filter get fresh fuel and good oil and a few plugs. Id say you will probaly need 280 or 290 jet.Do a plug chop to confirm.

 

[codwilbo]

Well i got

Air filter
Ams Oil
Spark Plug
New gas
260 main jet in and it will not start still... So now what do i need to check or try

 

[mud runner]

reeds
151515555151155

 

[codwilbo]

I just put new reeds in could they have broke???

 

[codwilbo]

All it does is make like a bogging noise and dont try to start or anything

 

[Awk08]

read that bottle of amsoil, most of them call for mixing 50:1, and even some that call for 100:1
although most on here mix the 50:1 at 32:1 ???
which exact name of amsoil do you have ?
are you mixing 4 ounces to every 1 gallon ??

check them reeds again, yes they can break anytime, as well as a plug can foul immedietly

then follow this troubleshooting guide.........

http://www.blasterforum.com/engine-13/my-general-troubleshooting-maintenance-30347/

 

[codwilbo]

Let me check agian ill post back in a bit

 

[codwilbo]

It says to run 50/1 ams premix and the reeds are fine not cracked or anything

 

[codwilbo]

ok so i got no spark at all i check all my wires and still no spark is my cdi box out or my on and off switch ??

 

[Awk08]

here's the electrical trouble shooting guides........

88-02

http://www.blasterforum.com/engine-13/ignition-troubleshooting-88-02-a-46159/

03+.......

http://www.blasterforum.com/engine-13/ignition-troubleshooting-03-a-46160/