Plug Chops?

[d.shook3]

what in the hell is a plug chop you mean changing the gap or what?

 

[Triple_B]

2-Stroke Plug Chop How-to

You do a plug chop do find out how much gas/oil ratio your running

 

[d.shook3]

2-Stroke Plug Chop How-to

You do a plug chop do find out how much gas/oil ratio your running

thanks for the help

 

[Triple_B]

thanks for the help

No problem...........

 

[Budget_Blaster]

Instead of cutting it away at an agle like the tutorial I. Put mine on the bandsaw and cut around the very top of the threads its easier and you see all of the porcelin.anytime you upgrade or dick with anything that has to do with the intake or exhaust no matter how miniscule it may seem do a plug chop.

 

[greasemonkey85]

do you have to run 6th gear wide open???? i have no way to run that fast. i could probably do 4th gear wide open.

 

[d.shook3]

Instead of cutting it away at an agle like the tutorial I. Put mine on the bandsaw and cut around the very top of the threads its easier and you see all of the porcelin.anytime you upgrade or dick with anything that has to do with the intake or exhaust no matter how miniscule it may seem do a plug chop.

could you take a picture or something of how you did it?

 

[piezzi]

Instead of cutting it away at an agle like the tutorial I. Put mine on the bandsaw and cut around the very top of the threads its easier and you see all of the porcelin.anytime you upgrade or dick with anything that has to do with the intake or exhaust no matter how miniscule it may seem do a plug chop.

I tried a pipe cutter, which worked very easy and SAFE.

 

[Budget_Blaster]

I couldn't have done it better myself!but see how the entire peice of porcelin is exposed that's what you want.I use a band saw because its easiest and quickest but I like the results of the pipe cutter.

 

[hudack]

i cut mine the same way with a hack saw takes like 5 mins i might just try a pipe cuter the next time

 

[Dan Thompson]

if your rejetting because your adding v force 3 reeds do you have to do a plug check, because i premix my fuel first so i can find out the ratio? and if rejetting for uni filter + vf3's and air box lid off