please help

[dent]

I am looking to find the size of the stems that go from jug to head I'm looking for the six stems the exact size and thread and all to look to buy. So if you know the stem dementons and exact sizes please let me know thank you.

 

[Herpderplol]

http://www.partzilla.com/parts/search/Yamaha/ATV/1993/BLASTER+-+YFS200E/CYLINDER/parts.html

you wont find them at a parts tore or hardware store.

if your stock ones are stretched i suggest you upgrade and go to cr500 studs.

 

[dent]

Will look into that for sure thank you

 

[jvb]

Will look into that for sure thank you

Like herpderpol already said, Honda CR500 studs will be a direct bolt-on.Good luck

 

[OConnor Racing]

The CR500 studs are NOT a direct bolt on. The top of the stud is 8 x 1.25 mm and the bottom is a 10 mm. The cylinder has to be drilled, tapped, and counter sunk.

 

[jvb]

The CR500 studs are NOT a direct bolt on. The top of the stud is 8 x 1.25 mm and the bottom is a 10 mm. The cylinder has to be drilled, tapped, and counter sunk.

Sorry I was wrong, like the master said above^

 

[dent]

Thank you guys but just ordered stock studs from partzilla. So all will be fixed in just a few short shipping days lol