Parts that will fit your blaster from other quads.

[bagds101]

trial and error my bf buddy. if nobody wants to say anything about it then just give it a try yourself. if one way doesnt work then try something else. christopher columbus sailed a long way to discover america... go a long way to put the banshee brakes on a blaster. i would if i had em

 

[Muggzy]

trial and error my bf buddy. if nobody wants to say anything about it then just give it a try yourself. if one way doesnt work then try something else. christopher columbus sailed a long way to discover america... go a long way to put the banshee brakes on a blaster. i would if i had em

You're a funny guy Bag Of course I'm gonna have to do it trial and error myself since no one is responding. I am putting a lot of banshee stuff on this puppy. The parts are easier to get (and cheaper in many cases) After all, there are a LOT of parts that fit the Banshee, Raptor, warrior and YFZ450 Guess I've got a topic for the "How To" forum I:I

 

[bagds101]

the names chris btw

 

[!!BlasterBro!!]

does any one know how much lower4 a blaster will sit with the banshee rear shock

 

[Muggzy]

does any one know how much lower4 a blaster will sit with the banshee rear shock

I think it'll sit higher. I just put Banshee fronts on and the frame is "maxed out" I had to compress them slightly to get them on if that's any indication.

 

[PGH PA 2 STROKE]

a RM 125 rear shock works great same with the carb too
this is a definet STICKY

 

[xJust_Causex]

A banshee rear will make it set way lower, it would be good for a street bike, maybe a circle track bike, but to lower for MX or trails.

 

[Kwikness]

I was checking on the brakes from different quads and it just says "do your own research". I need to get an entire brake setup and I need to know which ones will mount up with no fabbing.

 

[Blaster fool8]

Is the raptor 250 have the same rear fender as an 700. I heard you need the seat and of so does it mount right?

 

[Larry's Shee]

I was checking on the brakes from different quads and it just says "do your own research". I need to get an entire brake setup and I need to know which ones will mount up with no fabbing.

AWK08 is only no fab set-up I know of, or 03+ carrier+brake.

 

[scottabellinger]

Gotta say this is perfect... great job!

 

[Face78]

I just picked up a 400 ex rear shock for 22 shipped on ebay. What exactly is the procedure to make it fit? Thank you!!!

 

[speedyslyder]

 

[Face78]

Thank you! Just ordered bushing/ Bolt kit from oconnor. Can't say enough how valuable this forum is!!!!!!!!!

 

[Wifesblaster]

Thank you! Just ordered bushing/ Bolt kit from oconnor. Can't say enough how valuable this forum is!!!!!!!!!

Well it's at least worth $10 because your a supporting member

Welcome aboard Botha.

 

[Daniel67]

So I can buy Yamaha raptor 660 front shocks and put on my 2004 blaster and they will go right on

 

[bajaislife]

would banshee skid plates work?

 

[Gabe]

Will a Yamaha gp 440 fit?

 

[best]

a RM 125 rear shock works great same with the carb too
this is a definet STICKY

Hmmm, what year RM125?

 

[ProjectBlasturd]

I have been seeing questions everywhere about will another quads part fit onto my blaster? Well here is your answer. Its not a complete list yet, but its a start. This is all the info. I have gathered so far, hope this helps.


Note: All Parts listed will fit a stock blaster unless otherwise stated- All parts on the list are believed to fit, however I do not have first hand experience with all of these parts, also I have tried to do as much research on these as possible. There may be other parts not on the list that will fit, if you know of a part that will fit or more info. on these parts I will add it to the list.


REAR HUBS
Yamaha- Banshee
Yamaha- Warrior
Yamaha- Yfz
Yamaha- Raptor 660

FRONT HUBS
Yamaha- Banshee

AXLE
Yamaha- Banshee

Sprocket

Yamaha- Banshee

Carrier

Yamaha- Banshee- Must put spacers between carrier and swingarm

FRONT SHOCKS
Yamaha- Banshee
Yamaha- Raptor 660
Kawasaki- Mojave- Need to grind down bottom mount
Yamaha- Yfz- Need +3 +1 a-arms or diamond J widening kit with shock conversion
Honda- TRX400ex- Need +3 +1 a-arms or diamond J widening kit with shock conversion

REAR SHOCKS
Yamaha- Yfz- Not sure on details but I know its been done
Yamaha- 700 raptor- Not sure on details but will work (same length as stock blaster shock)
Yamaha- Banshee- Can be made to work but will lower back end
Honda- 400ex- must adjust the air box to fit resivor, must drill out bottom mount and make custom bushing for the top and it is near impossible to drill out the top mount for the blaster pin to fit.
Suzuki- Ltz400- must adjust the air box to fit resivor, must drill out bottom mount and make custom bushing for the top and it is near impossible to drill out the top mount for the blaster pin to fit.
Kawasaki- Kfx400- must adjust the air box to fit resivor, must drill out bottom mount and make custom bushing for the top and it is near impossible to drill out the top mount for the blaster pin to fit.
Honda- 250r- you can go for the atc 250r or the trx 250r pre 1986 is longer and will raise the back end a bit more must cut 250r top shock sleeve to fit snugly between the bolt holes on blaster, you can use your stock top bolt and your stock bottom pin cut the steel spacer to fit snugly between the bottom shock mount holes.


Thanks to blaster boy 200 for shock info link to more shock info is http://www.blasterforum.com/suspension-14/cheap-shocks-4054/

Brake lines:

Also many of the hydraulic brake lines from yamaha models are interchangeable. However I would suggest you do your own research on this.

Front Wheels
Yamaha- Yfz
Yamaha- Raptor 250/350/660/700
Yamaha- Warrior
Yamaha- Banshee
Polaris- Trailblazer
Polaris- Phoenix
Polaris- Outlaw 450/500/525
Polaris- Scrambler 400/500
Polaris- Predator 500
KTM- SX450/525
KTM- XC450/525

Rear Wheels
Yamaha- Tri-z 250
Polaris- Outlaw 450/500/525
Suzuki- Quadsport Z 250/400
Kawasaki- KFX 400/450
Honda- TRX 250/450R
Honda- TRX 250/300/400ex
Honda- TRX 250x
Can-Am- DS 250/450

Thanks to 4cfed for wheel info link to more wheel info is http://www.blasterforum.com/suspension-14/atv-bolt-patterns-13522/

Plastics- Note Some or all plastics may require modifications to fit but they have all been done.

Yamaha- Raptor 250/700
Yamaha- Yfz
Yamaha- Banshee (fronts require more mods than rear)
Honda- TRX 250r
Also- a 2003+ hood will fit on a 2002 and older blaster heres a link http://www.blasterforum.com/do-yourself-20/2003-2006-hood-1988-2002-blaster-13144/

Thanks to kylepotatoes for plastics info link to more plastics info is http://www.blasterforum.com/body-15/blaster-plastic-swaps-14146/

Trx 450r rear wheels are 4x110, blaster is 4x100