Opinions! New Blaster Graphics Kit

Adam

Adam

New Member
Jul 15, 2008
15
2
0
Virginia
www.aircooledracers.com
Drew these up this morning, what do you all think?? These are for a blaster, but I'm working on a set for the Raptor 125/250 and the 250X/300ex, which I will have up shortly as well. Any particular color variations you all would like to see??

If there is enough interest, I'll get a few sets made up!

DividedGraphicsProof.jpg
 
can u do other designs or is it just the air cooled racers? i like that and all being we are all air cooled but one that said FLOTEK PERFORMANCE with red and black incorporated would be sweeeeeeet I:I I:I lol
 
These are specificically for AirCooledRacers.com, but I'm sure you could add additional logo's/information if that's what you wanted to do.

I am starting a new company right now, Obscur Efx, that will specialize in doing design work outside of AirCooledRacers. It's more geared towards logo design, print media, but I can also do vinyl graphics and stickers as well. That's just now getting off the ground and I haven't even finished the website for it yet, but it will be fully operational within a month's time.

AirCooledRacers is specially geared towards entry-level ATV's under 350cc. Right now, we are just focusing on doing graphics and t-shirts, but we are trying to get a product line of CNC and Billet parts made up as soon as possible. If there's any specific products you would like, let us know!
 
  • Like
Reactions: yamaha28
i'd like to see some graphics to fit my plastic... front hood is trx450r style, 400ex front fenders, custom yfz450 style back fenders, and a ims 4 gallon gas tank... i've looked every where and can't find anything.
 
The forums used to be really active, but about a year ago there was some security loopholes through Invision Power Board and the site was hacked pretty bad. Data was deleted and the backup files I had were corrupted during it all.

Since then, we've switched to a new forum software and have been trying to get the place going again, but 450s seem to be the hot thing right now. Now, we are still focusing on getting the forums active again, but product development is the big thing we are working on right now. The ultimate goal is be a resource for entry-level ATV riders.

If you have any ideas on improvements we can make, I'd love to hear them. What sort of products would you like to see offered for Blasters in particular??
 
Adam said:
If you have any ideas on improvements we can make, I'd love to hear them. What sort of products would you like to see offered for Blasters in particular??
Click to expand...

I think grips that say blaster and stuff like that are neat... saw a pair on eBay, but they looked pretty low quality to me. Could be a cool opportunity.

If you need any help, let me know. I'd love to.
 
Hey man, i remember giving you some of my clips on the raptor for the promo vid, too bad the site hasnt been active :/ i logged in jsut now, but the boards wont load.
 
^^ Dareal, I had to switch the forums from Invision Power Board to Simple Machines, so the new link is now:

AirCooledRacers - Index

I'm still convinced the site has potential, I just haven't been promoting it like I should have been the past few months. I've been swamped with graphic design work on the side, so that has been my primary focus as of now.

BUT, I DO have a few ACR shirts left over, about 5-6 in a few different sizes if anyone is interested. $15 shipped to your door. And we are now offering powdercoating services through AirCooledRacers, so things should pick up through that as well. Products are really a primary goal for me though, so let's hear it, What do you guys want to see for blaster's in general?
 
Adam said:
^^ Dareal, I had to switch the forums from Invision Power Board to Simple Machines, so the new link is now:

AirCooledRacers - Index

I'm still convinced the site has potential, I just haven't been promoting it like I should have been the past few months. I've been swamped with graphic design work on the side, so that has been my primary focus as of now.

BUT, I DO have a few ACR shirts left over, about 5-6 in a few different sizes if anyone is interested. $15 shipped to your door. And we are now offering powdercoating services through AirCooledRacers, so things should pick up through that as well. Products are really a primary goal for me though, so let's hear it, What do you guys want to see for blaster's in general?
Click to expand...

i would like to be able to order the graphic kits but in custom colors and wording, also everybody likes shiny stuff, any cover that can be changed out for a a/m would be cool. those sprocket guards that are made of aluminum are kinda tough to find
 
You can definitely customize our graphics with your name, logos, etc. Currently, I do not the resources to print them myself, but I can get discounted rates on printing due to the volume of work I've had done in the past. Is there any specific color variations you would like to see on this particular set that I could mock up for you guys??
 
I am thinking of switching up my color scheme. I am gonna add some blue to the black/green combo I have now. She was pretty when i built her, she is dirty and in need of some lovin Now.

So i'd like to see black/blue/lime green/Silver.

I also think the 3'd image of diamond plate as a backround would be killer!
 
You must log in or register to reply here.

Similar threads

Y
CR85 Blaster Swap
Replies
3
Views
354
Engine Mods and Swaps
YamahaNutz
Y
BlasterOrDeath
Seized 3 new pistons. 1 old one
Replies
5
Views
472
General Support
BlasterOrDeath
BlasterOrDeath
Saimon69
MY YZ250 SWAP BLASTER BANSHEE INSPIRED
Replies
0
Views
845
Engine Mods and Swaps
Saimon69
Saimon69
RIDE-RED350r
1995(?) Blaster, two-phase rebuild with my daughter
Replies
12
Views
2K
Full Rebuilds
RIDE-RED350r
RIDE-RED350r
Blaster200_117
Project YSF250r is a go! A Baja built yz250 swapped blaster.
Replies
16
Views
1K
Suspension
Blaster200_117
Blaster200_117
Top Bottom
Back