oil

[blaster64]

HI guys I just wanna know what kind of two stroke oil a 06 blaster uses synthetic or normal. I also want to know what oil is thrown in to lubricate the gearbox and crank and where do you throw it in. Sorry for asking such stupid questions I'm new to the whole blaster thing.

 

[Street2uned]

My buddy sold me the blaster that I have about a month ago. He recommended using a blend of synthetic and regular. I've been using Castrol Syntec blend. There's a DIY around here for changing your crankcase oil I think. Regardless, look by your right foot when you are sitting on it and you'll see the cap where you put the oil in. The drain plug is on the very bottom. If I'm not mistaken, it takes .75 quarts. Check the manual to be sure.

I'm sure there will be more experienced people chimming in soon...

I've found that the people around here are pretty easy going and don't mean harm if they poke at you. I'm still learning too...

 

[peacher213]

I use Yamalube 2r, 32:1,
And Belray Gear Saver 80W for the tranny (There is a fill plug on the clutch right side of the engine) *also a drain plug on the bottom*

OH YA and dont forget about the sight glass for the tranny oil, also on the right side of the engine

 

[xsicxxx]

use klozs r 50 and yamylube 4 stroke 20 50 for your trans

 

[2smoker85]

i use yamalube 2r, 32:1, you can use 10w30, thats what a lot of people use here, then you got bel ray, depends on how much you want to spend, it all does the same thing with different additives

 

[blasterboy91]

dont use synthetic....

 

[stephen12091985]

i use castrol 927 to mix with and maxima mtl 80wt for the crank case

 

[chrisroberts916]

And to that I say DO, do use synthetic.
B-)

I use belray gear saver 80W $8.99 shipped on ebay.

I use synthetic ATF in my case

 

[chrisroberts916]

I swear I read here some where and by some one I respect for there opinion.
I can't find it now, you can't search ATF, I will continue to look. Maybe I'm wrong but that's what I've been running.

 

[peacher213]

The manaul calls for 10w30 oil. The guy i bought mine from had belray gear saver, so i use the same

 

[Blaster#55]

Make sure you dont use 80w90 transmision oil because it is to thick and is bad for your clutch.

 

[nd jat]

Don't use regular motor oil it's hard on the clutches, The additives they put in it will eat the clutches.