the line from the oli to thecase wolnt work. the oil light is on and dont know how to fix. i put a new line on there but it doent want get the oil to the case. should i just buy a block off kit and and block the plates off.:-/
oil pump
- Thread starter blasterboy215
- Start date
yes, but have you checked for a blockage inside the oil tank and are you sure the pump isnt toast. dont run it if its not getting oil. i would go ahead and remove the gear and plug the side of the carb and then mix it yourself.
i recommend pre mixing your oil instead of paying 40 bucks for the little aluminum block off plate take the pump off of your side cover throw the little plastic gear in the trash. then take the 4 screws out of the front of the pump and take the 1 gear out of it but leave the shaft that sticks through the side cover in it and clean it out with solvent let it dry and fill it with silicone and put the pump back together its really easy to do i did it to mine left the pump sit overnight so the silicone sets up its a pretty much free mod minus the silicone and it works and doesn't leak!
