oil injection inlet?

[little3mil]

I need to figure out which nipple on the carb is the oil injection inlet line? I cant find an answer, its a stock carb and when i got it there was nothing blocked off so i think its suckin in air there causing it to idle high when it warms up. Also could this be my float level?? I measured it and it was just under an inch.. 1 inch = 25.4mm so im guesing its right. (around 21mm) TORS is removed heres a pic

any help would be great
thanks


http://i36.tinypic.com/hx6o46.jpg

 

[yb200]

the oil line is the red tube with the screw in it

 

[NOVIS]

^^^ u got it

st-stu-stutter 15

 

[little3mil]

ok thanks, I just pluged that so it was leaking air. And the one an inch to the right?? plug that or leave a tube on it?

 

[kylepotatoes]

For the one an inch to the right you can put a tube on it or just leave it how it is. But don't plug it

 

[little3mil]

thanks its running way better!

 

[super noober]

you should put some chain rollers on also, just rubbing on the shaft is not too good for the chain.