oil coming out of the exhaust

[hammertime#205]

Should there be oil coming out of the exhaust port?

 

[acezeesawtooth]

if its not sealed properly it will. sometimes it will do that until its heated up and everything seals properly. but but a little copper gasket seal in there and ride

 

[4cfed]

also if your jetting is rich you will notice the 'spooge' if you dont ride hard to clear it out

 

[acezeesawtooth]

^^^ valid point

 

[hammertime#205]

Spooge what is this I just did a plug chop to day and it looked good to me?

 

[acezeesawtooth]

Spooge what is this I just did a plug chop to day and it looked good to me?

by spooge he means the oil that is globbing up and running out the motor. if its to rich and not ridden hard enough itll build up. if its jetted right itll seap out if theres a leak

 

[hammertime#205]

Do the make a sealer for here besides the ring that came with my top end kit?

 

[hudack]

if its not sealed properly it will. sometimes it will do that until its heated up and everything seals properly. but but a little copper gasket seal in there and ride

that is all lol

 

[4cfed]

no that is not alll............

go to your local parts store and get a tube of ultra copper rtv and use that to seat it up, i use that on all my 2 stroke exhausts

 

[hammertime#205]

Cool thanks I will look in to it.

 

[4cfed]

Cool thanks I will look in to it.

my uncle uses it for header gaskets on his 60 belair drag car...

 

[hammertime#205]

Cool If you running to rich and have a bad seal will your plug still be good or will read wright?

 

[acezeesawtooth]

If air is sucking into that port it will give the illusion that you are jetted right while you are truly running to rich because of the added air

 

[hammertime#205]

So I need to fix that first before i can do a good plug chop?
That may explain why the plug is showing that it is almost lean,and have a 460 dyno jet main in it.