oil block off kick start lever problm

[kx80berger]

i installed the oil block off kit and now my kick start wont come back up after you kick it i half to pull it up with my hand wahat did i do wrong ?

 

[yb200]

sounds like your kicker return spring is not on right or messed up

 

[kx80berger]

i didnt mess with the spring at all

 

[mr_3_0_5]

they pop off or break

 

[yb200]

take it off and inspect/fix

 

[kx80berger]

when i get home i will and that plate should the flat side be up or down

 

[yb200]

block off plate??? flat side to the engine

 

[UniRacing]

The spring is bent off or broke..

take the cover off and bend it if needed,put it back in the hole

 

[yb200]

The spring is bent off or broke..

take the cover off and bend it if needed,put it back in the hole

you said put it in the hole huh huh huh

 

[fioz600r]

I agree with everyone else.
Just take the cover off and check to see if the kicker gear and sprins are in right.

They go like this
http://www.blasterforum.com/do-yourself-20/how-install-kickstarter-gear-2227/

Hope it helps you out and you figure out your problem bro.

 

[liminlime_2005]

hey i had that same problem when i installed my block off kit. i took the side cover off and kept moving the spring until it caught. lol i know that doesnt help that much. what im sayin is just examine it a lil better.

 

[kx80berger]

i got it done thanks