i bought a 2001 yamaha blaster for 350 bucks. i did not have spark when i bought it. so i fixed that problem. put some gas in it and started it up. when it got started up when u hit the throttle it boggs right down. so i took the carb off and cleaned it and tried it again. and it did the same thing. when u frist start it up it has good throttle response but when it warms up it starts to bogg down. so i need some help from here what can i do to get so it does not bogg down.
not running right
- Thread starter yamaha01
- Start date
also check to see where the air screw is set at. or it could be a tors problem like awk said.
turn the air screw on the carb all the way in until it just seats, then turn it out 1.5 turns. also did you check the float level, and do you have good flow out of the petcock?
turn the air screw on the carb all the way in until it just seats, then turn it out 1.5 turns. also did you check the float level, and do you have good flow out of the petcock?
