nooooo spark

[speedemon17]

ok this piece of sh** blaster the hurricane 1 i'm selling has no spark like i have a guy coming later this evening and when i try and start it it has 1 spark and that will be it it will have spark and then it will losse spark i checked the coil cdi box the plug on the spark plug coil and i even took stuff from my race blaster and it still does the same thing help me please whoever helps me and it works expect tons of rep i need help A.S.A.P

 

[dbowhntr]

Did you ohm out the stator? Check the grounds where the coil bolts to the frame and there is one also behind the cdi. Sounds like you eliminated everything except the kill and ignition switch, stator, and wiring by swapping parts. If you have a wiring diagram you can jump around the switches. They simple give the system a ground so by disconnecting them it eliminates them.

 

[244blackblastard]

What happened before that it stopped firing? sounds like it could be a wire that's grounding out on frame or motor when it's not suppose to. I had a wire from the stator once that was grounding out on one of the metal wire clamp holders.

 

[speedemon17]

we had it 1 minute and the next minute we dont

 

[Blaner]

check your woodruff key. see if your magneto had play, if som the key is snapped!

 

[jlsparky7]

Tried a new plug? Coil ohm test? Start simple and use the process of elimination. Check your coil ground and plug.

 

[Antec1200X]

i had a simular problem.the wires were broken off from where the wires come out from the flywheel cover.grr check where the wires come out of the stator side of the engine
i can sit here all day trying to explain.today is just not my day lol