no start plz help

[DussinC]

i was riiding today and the blaster kept cuttin out at 3/4 throttel then when i got home i parked it for a while went back out and now it wont start good i will have to kick it 10 or 15 times IF it starts at all (usually only takes one maybe two kicks)now it just wont start. what could this be?

 

[stephen12091985]

clean the carb maybe?

 

[DussinC]

clean the carb maybe?

for got to mention it has new top end with less than 3days riding on it. will clean carb tomarrow.

 

[chancyskiles]

sounds like it could be running lean if cleanin the carb doesnt work you should check your jets..

 

[Blaster 326]

pop a new plug in it.See what the old plug looks like.Alot can be told by your plug

 

[DussinC]

sounds like it could be running lean if cleanin the carb doesnt work you should check your jets..

its never done this befor

 

[visipe]

might be ignition coil or something electrical too

 

[DussinC]

pop a new plug in it.See what the old plug looks like.Alot can be told by your plug

wll i put the spark plug in it that was inthere when i rebuilt the top end last week and now it runs fine any clues to why the new one was dark brown and was causing it to cutout at high rpm's? or not crank at all? (it was the same type plug, same brand and everything)

 

[fatboytank320]

Fuel Mixture? I use to mix mine to thick and would kill plugs like crazy.

 

[liljatownboy]

yea to much oil can be in the fuel fouling up the plugs.

 

[Blaster 326]

I run mine at 42.1,and so does my friend,no problems with oil.Could've had a crappy plug even though it was new.