New here so WHAT's UP!!! Just purchased a 03 Blaster. I have had dirt bikes in the past but this is my first 2 Stroke. However, the guy told me that i don't have to pre mix... How is this possible..
Because You have oil tank for 2 stroke oil under your seat.
Its recomended to remove this because it can go wrong and in result it ends up in seizing your engine
Thanks guys!! but i hate to say it but im more lost now!! How do i remove it or block off like you all are saying? & if i do so then i will have to premix correct?? Like i said before i have been a 4 stroke rider so mixing and all this is new to me.
Thanks guys!! but i hate to say it but im more lost now!! How do i remove it or block off like you all are saying? & if i do so then i will have to premix correct?? Like i said before i have been a 4 stroke rider so mixing and all this is new to me.
step1: unbolt the tank and throw it away..
step2: follow the lines to the right side cover and cut them off
step3: cut the oil line off the carb but leave enough on the carb so you can plug it off with a screw or something...
step4: plug off both lines going into the right side engine cover...
step5: take off the right side engine cover and remove the white oil injection drive gear thats attached to the cover...
New here so WHAT's UP!!! Just purchased a 03 Blaster. I have had dirt bikes in the past but this is my first 2 Stroke. However, the guy told me that i don't have to pre mix... How is this possible..
the bike has a oil injector if you lift your seat up it you will see the oil tank. just put your 91 octane in the tank and whenever the oil light comes on you put oil in it it mixes itself in .........way betterI:II:II:II:I