no electric?

[BadLS1]

Ok so the previous owners along the line had removed all the wiring batteries and lights but the last guy who had it wired it where it would at least start. I'd like to put lights back on it. Does anyone have a wiring diagram or simple intstuctions on what type battery I should purchase? Where to run wires so that I can turn the lights on and have them charge? Thanks, Mike F.

 

[blaster20001]

just so u know theres no batterys on blasters and there a switch on your handle bars to turn lights on and off and as far as wiring i cant help ya out

 

[peacher213]

check out this manual. http://www.rydindirty.com/blastermanual.pdf

everything you need for your blaster

 

[Blasterb0y794]

Blasters dont have a battery. As far as electricity you run everything of your stator coil. To add a light, take off the front hood. Find the on/off switch on the left side of your handlebars and follow it down. If you need to cut the plastic cover that protects the wires, and keeps them in one bunch. You should find a green and brown wire. If you dont have the wires, but a new switch and it will have the brown and green wire for your light.

 

[Shib786]

use this it helps so much i used it...

http://i275.photobucket.com/albums/jj318/battbike/100_1973.jpg

 

[BadLS1]

use this it helps so much i used it...

http://i275.photobucket.com/albums/jj318/battbike/100_1973.jpg

Man you all are awesome! Thanks for all of your help!!! I'm sick as a dog but once I get some time I'm going to make this happen!!!