newb light questions

TheD0k69

New Member
Jan 29, 2013
116
0
16
30
Kalamazoo Michigan
what is the stock wattage you can put front and rear lights at?
are there any good aftermarket lights to use?
how hard is it to wire up a car led third brake light?

Thanks for the help.
 
There is so!

Incandescant globes will run both AC and DC.

It is only LEDs that require DC and that can be simply rectified.
 
If you are looking at LED they often come with a rectifier built in, not always though.

Rectifiers are pretty cheap it is only a diode assembly., not needed if you are running conventional bulbs.
 
uh, this is random but....you could get those led fogs from walmart, wire in a small battery and a switch, and you got your heads, as for your tail, youd have to find some red ones or something and then just wire that in too.....idk how well it would work when you hit the brakes, but at least people would be able to see you,.
 
Unfortunatly one would not get very far before the small battery would get discharged and leave you in the dark.

The Blasters electrical system does not allow a battery to be charged without the fitting of a rectifier.