New topend need help

[1995blaster]

i put a used topend on my new bike from my old bike and it wouldnt start. Has good spark maybe it wasnt gettting fuel. I sprayed some carb cleaner in the carb and it fired right up has good reeds btw. Also it has a MAJOR AIR LEAK on the clutch side but i think there isnt any fluid in there anyways i am just starting it to see it runs then ill put in the clutch seals when they get here.
I opened up the carb and the main jet is a 300 anyone got a stock one? also the pilot is 32.5 isnt the stock 32?

Here is my questions

Does there need to be a washer under the main jet? MY other bike has one but not this.

What is the stock pilot jet?

Anyone have a stock 230 main jet?

Could a major air leak and no filter make it not start? (just to start is i wouldnt drive it like this lol)

 

[Prime]

Nope, stock is 32.5. And any local yamaha dealer should have a 230.

 

[Prime]

Oh and I forgot to mention, you should have that brass washer for under the main jet, you don't need it but you should get it if you don't have it.

 

[Surfrjag]

Sounds like your not getting fuel like you said. An air leak plus no filter will be lean for sure. Why would u need a stock main jet? Even romoving the airlid would require a larger one I would think.

 

[1995blaster]

its on my 2nd bike its completly stock idk why it has a 300 main in it.

 

[xJust_Causex]

just wait till you get the seals replace them, then worry about getting it started. While its down go through and give the carb a good going through and cleaning.