new to blasters and forum please help!

[simon786simon]

ive bought a blaster 02 model thats had a new small end bearing new rings but now it wont hit the powerband in gear 1,2,3 but gear 4 hits and takes off any suggestions was thinking reed valve or timing maybe or carb problem

also the bike is stock at the minute but im unsure on the carb as it came with a spare carb so wondering if its not stock carb? how to tell? i want to add an fmf exhaust system and k&n filter with v3reed wot carb will i need? standard piston in ive already downloaded manual and things im hoping for responses not just links with no explanation please dont bash me lol!!

 

[EZRider76]

For the carb, measure ID of engine side. 26mm is stock, look for name on carb, mikuni or MIC will also be stock brand.

 

[simon786simon]

thanks for the reply yea my carb is stock fixed my problem needle jet was on the richest setting moved it up two notches and powerband in lower gears was strong everything on the bike is stock but i wanna get a fmf exhaust and vf3 reeds and a k&n what main an pilot would you recomend?

 

[doodleaddict]

a plug chop would help you with the jetting look in the do it yourself section it's on the first page how to do it I haven't done one yet so I'm no help thee