New member, plastic question

[kylec922]

First off, hi!

Anyway just picked up a 95 Blaster for $200 I'm currently doing a frame off resto and had a question about the plastic. Is there anything I can use to even the surface for paint? Ie bondo etc? The previous owner spray bombed it, and theres a few chips. I have plastic binding paint and clear which has stuck well just making the chips and flakes more obvious.

The only thing done to the bike is a big bore kit 3 months ago. Has a knock so need to go through that as well, just wanting to clean the body up first. On my phone now, will post pics later.

 

[Awk08]

i wouldnt use any filler, it'll crack if the fender is ever hit and bent, just sand them down some, start rough and finish with fine wet sanding

 

[kylec922]

i wouldnt use any filler, it'll crack if the fender is ever hit and bent, just sand them down some, start rough and finish with fine wet sanding

Thanks. I was dreading this route. I paint guitars so I have plenty of experience with this. Thanks again!

 

[1995blaster]

where the chips are just sand there and it will even in with the rest and will not be noticable but make you sand with light grit so it is smooth