New brake Hadles..

[smoukidouki]

Hey ..Im an owner of a Blaster sincea year ,i read alot in this forum but this is my first post...... its a while since the school is over so please dont biotch about my english ....
I ordered a +3 swingarm and i was wondering if the stock back shock will still fit ?....if its fit would the tail side get lower ?

have a nice day or night wherever u live

 

[Blaaster]

It all depends where the shock mount is placed, cant tell until you see it.

Makers nearly always relocate the mount to suit standard shock lengths.

 

[Painthehouse]

You will need extended brake lines though. Just giving you a heads up. And banshee chain is a perfect fit for the +3.

 

[blasterdemon7]

The rear shock should fit fine if the swinger was built correctly.x2 on the Banshee chain. You should upgrade to a 400ex rear shock. I was just playing around one day and put my stock shock on with my +3 swinger and it was awful . I found out what they mean by pogo stick. With a little playing with the adjustments on the 400ex rear , it rode like a Cadillac in the rear.

 

[smoukidouki]

thx for the replies .....the 400 ex is shure nice but its hard to find here though,even on ebay ....i just wait till its here and messure then...i order the Chain and the break lines when i get the Swingarm but thx its good to know .....
im wont to get a new break handle ,something like this
KTM RC8 Bremspumpe Magura | eBay

are there some messurments (size ,pressure ) i have to stick to ? all other break parts are stock

 

[Larry's Shee]

I would look at any other Yamaha front master cyl, more likely to fit. Banshee, warrior, yfz450, raptor.

 

[smoukidouki]

ok...but the problem whith yamaha mechanism is that they are sooooooo big ,there will be no room for the short brake handle if i put a thumb throtle on it ,i will proupobly only get the pointing finger on it ...or am i wrong ?..

 

[smoukidouki]

i found a raptor handle that would work for me ,do i need a new front break line then ,or is it plug to plug

 

[slickerthanyou]

i found a raptor handle that would work for me ,do i need a new front break line then ,or is it plug to plug

Plug and play! If you have banshee, raptor, blaster, lines! you'll be good to go!

 

[smoukidouki]

can somebody tell me what the stock front brake piston size is ?

 

[smoukidouki]

I know the front break pump on my blaster is a NISSIN but i cant find any more info to it ,can somebody help me here