nerf bars with yfz healgards

[brianfulcher15]

anyone done this? Id like to see some pictuers of it and to know if its possible.

If not i guess im just going to get the moose ones.

 

[Awk08]

the yfz heelies must have been designed to run with nerfs, they fit together like a glove, just do it !!!!!!!!!!
heres what i have on my sons...................

 

[stabor1122]

Yeah I was concerned about that too but the raptor guards I just bought looked like they would fit great.

 

[brianfulcher15]

is there any pitricular nerf bars i should get? I want some cheap ones that i can polish to a chrome look.

 

[brianfulcher15]

ok, so im looking at ordering a set on ebay. will the yfz pegs bolt up tot he blaster holes? if so im thiking about geting a set that comes with the pegs as mine are rusted up pretty horribly.

is there anywhere that sells them new?

 

[stabor1122]

I dont think the YFZs will bolt straight to your frame (I know the Raptors wont) but the holes in the front and rear of the pegs (where the heelguards and nerfs mount) do line up and you can cut off the YFZ mounts and bolt the pegs to your stock ones using these holes to widen your stockers. You could use a wire brush or sand paper to clean up the stock ones and paint them.

 

[Awk08]

I dont think the YFZs will bolt straight to your frame (I know the Raptors wont) but the holes in the front and rear of the pegs (where the heelguards and nerfs mount) do line up and you can cut off the YFZ mounts and bolt the pegs to your stock ones using these holes to widen your stockers. You could use a wire brush or sand paper to clean up the stock ones and paint them.

all correct, yfz's will not bolt to our frame, but can be cut and bolted to our pegs

 

[super noober]

all you have to do is make a few brackets, its really easy.