Need'd Advise on Engine and carb Hose's

[Norm43920]

Like the title says. I have a 96 I believe the carbs are stock. There are like 4-5 hoses for drains and overflows and whats not. Where would I buy those new? Can I just use Hose? I have fuel line from a RC Truck would this work? Just curious They all seem to be in poor shape with kinks and or burns in them.

 

[yb200]

ATV Parts, ATV Tires, Dirt Bike Parts & Motocross Gear | Rocky Mountain ATV/MC

tusk fuel and vent lines

 

[brandoz28]

go to your favorite cycle/atv place and get some bulk hose

 

[Norm43920]

Sounds good. how long should I make them. It appears that they are abused and have been cut shorter. Do they all need to drop in that same spot behind the motor? Should they hang below ?

 

[brandoz28]

http://www.blasterforum.com/do-yourself-20/stock-blasty-carb-line-routing-22823/


check out the DIY

 

[stephen12091985]

go to ur local hardware store

 

[Norm43920]

Cool thanks for the tips. Im gonna check a few places tomarrow Figure ill just take the hose's with me.

 

[Foolio]

I 2nd the hardware store. The fuel line you want might be behind the shop counter. I like the transparent stuff to see if anything got in the lines and its a little less costly than at the mc/atv dealership.

 

[rideyamaha09]

Yea I'd say the hardware store as well, its usually the cheapest there.

 

[Juggaloclownz187]

do i need 1/4" line?

 

[Blaster200boy]

Get hose that wont get all hard and stuff...i like my neoprene fuel lines, they seem to hold up...or at least they have been for 6 months...

 

[Juggaloclownz187]

Yep, gonna go with the tusk line, but it gives the choice of 1/8" or 1/4" which should i choose?