need help 200 blaster

[Bryan]

i kust bought a 2000 blaster and got it running....kinda. the blaster starts up and runs good but when i put it in 1st gear and let off the clutch it looses power and then just dies. i thought it was the tors so when i took it off it ran better but still doing the same thing. i cleaned the carb twice and now i have no clue what to do next...can anyone help me?

 

[scotj77]

compression test man. needs to be atleast 110.

 

[acezeesawtooth]

^ yeah sounds like it has enough to idle but not enough to through any torque down to the move the frame

 

[Bryan]

if its under 110 psi it will die under a load?

 

[sheeblast]

Maybe sure your filter is clean, your jetting is good, have strong spark.
This is after you do a compression check

 

[scotj77]

if you have low compression anytime you put load on the motor it will die. 110 is about as low as you want to go before a rebuild.

 

[royalt67]

What did you do for TORS removal? The simplest fix, electrically, is to unplug the TORS box entirely (under the hood).

 

[Bryan]

when i got the blaster the throttle sencer was gone and the tors on the carb was cut so i just took off the box up front under the hood.