need carb help for new engine

[dano174983]

i just rebuilt my blaster engine. has vito's +3 crank, .080 over piston, and bills pipe and silencer. on a stock carb what should i have setup?

poilet jet?

main jet?

needle setting?

air mixture screw # of turns out?

 

[mike2225]

there is no standard setting. every motor is different. also whats the temp out? whats your elevation? lid or no lid? your gonna have to buy a handful of jets and try. but maybe someone on here has similar setup and can give you a ballpark on what jets to start with. remember-higher in elevation smaller jet. same for higher temp.

 

[dano174983]

most riding is from 60-80degrees outside. about 800ft above sealevel. with the airbox left on

 

[mike2225]

id go a couple bigger then stock. when your WOT and it skips. back down one jet size.

 

[hudack]

im not sure but i think your gana be around the 310 area with the main but dont hold me to that and for the needle id try mabey middle seting and air srew ur spose to start with1.5 turns out and turn it out half a turn at a time til its right dont hold me to that im still kinda new to jetting myself goodluck