N00b pipe install question

[Blaster_Kart]

I picked up an FMF SST pipe, and it has no spring loop on the flange, no o-ring, and no silencer to stinger clamp or coupling. Should it have any of the above? I have always seen silicon or rubber couplers between stinger and silencer. Does the SST just slip on and go? Also, do I need an o-ring for the pipe to flange connection? Will a Banshee o-ring/spring kit work?

 

[4cfed]

it should have a flange that bolts to the motor, and a spring or springs, you slip the pipe onto the flange than hood the springs on ( slip on), should be a high tepm rubber or silicone coupler that conects the head pipe and mid pipe.. if you dont have that you can get the stuff from fmf

 

[Blaster_Kart]

Well, the head flange is the type with no spring hook. I will probably weld a washer on it to solve that issue, but what is this I read about o-rings? I guess I'll buy a coupler for the silencer.

Thanks for the help.

 

[4cfed]

i think o ring is the gasket that goes between the motor and the flange

 

[Blaster_Kart]

IOC. I guess that makes sense.