more carb problems

[mud runner]

ok the bayou i got a while back for free is having some carb problems i fixed most of them except the choke where it screws into the carb will not stay in if you screw it in it just falls out any ideas

 

[Wifesblaster]

Loctite? I have no idea.

 

[mud runner]

it just falls out if you toutch the carb im about to fill the hole where the choke goes in with ultra black and not have a choke

 

[Larry's Shee]

You'll hate yourself for deleteing the choke. Clean both pieces with brake clean, acetone, paint thinner and "glue" it in with 3Bond or JB weld.

 

[Blaaster]

If you just fill the hole I fear you may simulate a full on choke situation.

 

[mud runner]

You'll hate yourself for deleteing the choke. Clean both pieces with brake clean, acetone, paint thinner and "glue" it in with 3Bond or JB weld.

im gonna try to glue the choke on because iv been told that these bayous are cold blooded