Mikuni TMX30mm help
- Thread starter fransie
- Start date
hey fransie,
the 30mm's aren't that much bigger than the stock carbs, it may be possible to use a hair dryer to heat the rubber boot and stretch it over the carb, allowing it to cool on there and retain it's new shape ?
or sand it out some on the inside to fit with a dremel tool ??
if not, here's what some do........
http://www.blasterforum.com/do-yourself-20/diy-big-carb-lil-boot-lol-dont-cut-one-up-try-36114/
http://www.blasterforum.com/do-yourself-20/adapter-bigger-carbs-stock-airbox-under-7-a-32852/
http://www.blasterforum.com/engine-13/those-you-bigger-carbs-44329/
i use reducing fittings from here for my aluminum airbox tube to my 34mm ....
http://www.siliconeintakes.com/index.php?cPath=2&osCsid=3180ba41b44a46013c172620321e4366
the new rubber boot used in the pics below is a plumbing fitting called a "fernco" it comes in all different reducing sizes
the 30mm's aren't that much bigger than the stock carbs, it may be possible to use a hair dryer to heat the rubber boot and stretch it over the carb, allowing it to cool on there and retain it's new shape ?
or sand it out some on the inside to fit with a dremel tool ??
if not, here's what some do........
http://www.blasterforum.com/do-yourself-20/diy-big-carb-lil-boot-lol-dont-cut-one-up-try-36114/
http://www.blasterforum.com/do-yourself-20/adapter-bigger-carbs-stock-airbox-under-7-a-32852/
http://www.blasterforum.com/engine-13/those-you-bigger-carbs-44329/
i use reducing fittings from here for my aluminum airbox tube to my 34mm ....
http://www.siliconeintakes.com/index.php?cPath=2&osCsid=3180ba41b44a46013c172620321e4366
the new rubber boot used in the pics below is a plumbing fitting called a "fernco" it comes in all different reducing sizes
