Up for sale is a mikuni tm28 flatslide carb, this carb will fit into your stock manifold and airboot, it is in fact 33mm instead of 34mm so there is a little play on intake but it does fully seal and is a direct replacement., on airboot side it is exact same as stock, their is 2mm difference in inside size but the flatslide improves throttle response greatly
I have beeen using this carb for my new build and although it took me a month to tune I am upgrading pipe and porting so need to go bigger.
I will send it with it's current jetting which I am using with mods but basically stock jug so should be close on stock motor with jetting.
Also it is virtually brand new (less than 30hrs use) and I will include Vito's Cable for your yamaha thumb throttle
First 100 takes it, this includes shipping in lower 48 I:I
DMC full exhaust also for sale here: http://www.blasterforum.com/sale-18/dmc-full-exhaust-43456/
I have beeen using this carb for my new build and although it took me a month to tune I am upgrading pipe and porting so need to go bigger.
I will send it with it's current jetting which I am using with mods but basically stock jug so should be close on stock motor with jetting.
Also it is virtually brand new (less than 30hrs use) and I will include Vito's Cable for your yamaha thumb throttle
First 100 takes it, this includes shipping in lower 48 I:I
DMC full exhaust also for sale here: http://www.blasterforum.com/sale-18/dmc-full-exhaust-43456/
Last edited:
. Spent the loot on (or should say towards) rims and tires.
