March 2012 BOTM Entries

[cbaber]

Entries for Blaster Of The Month (March 2012) are now open!

Please make sure you have read the following thread before creating your entry.
"Blaster Of The Month Entry Details, Rules and Requirements..."


Have a great time and GOOD LUCK!​

 

[86_Notch]

Chassis | Suspension | Controls:
A Arms: stock
Swingarm: T Rock + 4
Steering Stem: stock
Stabilizer: none
Axle : G Force adjustable
Carrier: stock
Locknut: G Force
Hubs F|R: stock
Bars: renthal
Throttle/Clutch Lever: stock
Grips: AME grips
Nerfs: unknown brand
Bumper: unknown aftermarket
Grab Bar: None
Front Shocks: stock
Rear Shock: 400 ex
Brake Lines: stock front, rear Awk's hyd
Rotors F|R: stock
Rims F|R: douglass alum
Tires F|R: holeshots front, rear 20 x 11 x 10 maxxis razrs

Body: stock
Frame: stock
Plastic: custom cut
Graphics|Seat Cover: ceet cover
Number Backgrounds: none
Handguards: none
Bar Pad: renthal
Fuel Tank: stock

Engine|Drive System: Ken Oconnor
Cylinder|Head: Ken Oconnor modded
Bore & Stroke: stock bore , + 3 stroker crank
Displacement: ?
Cam: n/a
Carburetor: Keihin 35 mm pwk
Air Filter|Box: uni filter, Factory 7 air box
Pipe|Silencer: F 7
Clutch|Plates: new clutch, lightned flywheel
Gearing F|R: 13/40 & 14/40 depending on where I ride
CDI|Killswitch: stock
Cooling: stock
Other:
__________________

 

[kf7lcw]

A Arms: Stock
Swingarm: Stock
Steering Stem: Stock
Stabilizer: None
Axle : Stock
Carrier: Stock
Locknut: Stock
Hubs F|R: Stock | Stock
Bars: Renthal
Throttle/Clutch Lever: Factory
Grips: Aftermarket Generic
Nerfs: None
Bumper: Factory
Grab Bar: None
Front Shocks: Shockworks
Rear Shock: Shockworks
Brake Lines: Factory
Rotors F|R: Stock | Stock
Rims F|R: Stock | Stock
Tires F|R: ITP Holeshots

Body: Fenders Cut
Frame: Stock
Plastic: Factory minus Fenders
Graphics|Seat Cover: None
Number Backgrounds: None
Handguards: None
Bar Pad: Yes
Fuel Tank: Stock

Engine|Drive System:
Engine currently under rebuild

 

[245stroker]

Chassis | Suspension | Controls:
A Arms: +4+1 atv fourplay long travel
Swingarm: +3 atv fourplay round housing
Steering Stem: stock
Stabilizer: none
Axle : durablue eliminator
Carrier: fireball racing
Locknut: durablue
Hubs F|R: stock
Bars: stock
Throttle/Clutch Lever: stock
Grips: stock
Nerfs: xfr propeg
Bumper: xfr jaws
Grab Bar: dg
Front Shocks: custom axis triple rate long travels w/ adjustable comp & rebound
Rear Shock: custom axis trx250r spring w/ adjustable comp & rebound
Brake Lines: +4 steel braided front / stock rear
Rotors F|R: stock / saw blade
Rims F|R: douglas fronts / omf beadlock rear
Tires F|R: holeshots front, custom grooved turftamer rears

Body: maier race front / stock rear
Frame: stock powder coated blue
Plastic: maier race front / stock rear
Graphics|Seat Cover: stock
Number Backgrounds: k&k atv
Handguards: none
Bar Pad: none
Fuel Tank: stock

Engine|Drive System: mumms the word ported
Cylinder|Head: vito's
Bore & Stroke: 72mm / 60mm
Displacement: 244cc
Cam: n/a
Carburetor: Keihin 35mm airstryker
Air Filter|Box: uni filter, cfm aluminum airbox
Pipe|Silencer: dynoport high volume
Clutch|Plates: ebc clutch
Gearing F|R: 13/38
CDI|Killswitch: tether
Cooling: cfm air scoops
Other: t.m. designworks stator cover, aluminum gas cap, aluminum rear brake rezzy, v-force 3 reeds

 

[colescustom]

Red Lable .190 Douglas rims
wraped in ITP Holeshot mxr6's
chassis skidplate
Maier Plastics
Maier (Custom made) Carbon hood/front fender
Msr bars w/ ODI grips
blue powermaid handguards
Pro DesignKillswitch
Streamline Steering damper (7-way adjust)
DG bumper & nerfs
Project blaster graphics and seat cover
galifer wave rotor
oil block off kit
14/39 gearing

suspension:
Burguard +4 (+1 forward) A-arms
Works front suspension
Lonestar rear axle
Lonstar +2 rear swingarm
Elka ELITE rear shock (high/low speed compression, rebound and preload adjust)

Engine / Intake:
EBC race clutch
Custom porting and polishing
.20 over weisco piston
hot rods camshaft
V Force 3 reeds w/ reed spacer
Toomey B1 exhaust / filter
stock air intake w/ custom air box lid
32:1 c10 mix

 

[dakine97]

Chassis | Suspension | Controls:

1. A Arms: 2. Swingarm: 3. Steering Stem: 4. Stabilizer: 5. Axle: 6. Carrier: 7. Locknut: 8. Hubs F|R: 9. Bars: 10. Throttle/Clutch Lever: 11. Grips: AME grips 12. Nerfs: 13. Bumper: 14. Grab Bar: None 15. Front Shocks: 16. Rear Shock: 17. Brake Lines: 18. Rotors F|R: 19. Rims F|R: 20. Tires F|R:

Body:

1. Frame: 2. Plastic: 3. Graphics|SeatCover: 4. Number Backgrounds: 5. Handguards: 6. Bar Pad: 7. Fuel Tank:

Engine|Drive System:

1. Cylinder|Head: 2. Bore & Stroke: 3. Displacement: 4. Cam: 5. Carburetor: 6. AirFilter|Box: 7. Pipe|Silencer: 8. Clutch|Plates: 9. GearingF|R: 10. CDI|Killswitch