mandatory to torque and loc tite?

[UniRacing]

Mandatory for the clutch spinrgs to be the exact torque spec?

Mandatory for loc tite on the lock nut for the push rod?

 

['blanshee'man]

well its not a law that somebody enforces and slaps you up side the head if you dont. BUT it is good practice to torque to stock specs

 

[UniRacing]

Well see reason is because i dont have a torque wrench or the cash to buy one

 

['blanshee'man]

o well thats a good reason. do know anybody that may have one that you can ask to borrow?

 

[UniRacing]

No not at all,thats why im here,my last resort "blasterforum"

 

[fioz600r]

Dam bro you are in a fix here........

I am big on torque specs!!!!!!!

I would wait till you can get one or find one to use......

 

[Paulie B]

Definitely put loctite on the push rod lock nut.
As far as the clutch spring bolts your OK to just tighten them down tight by hand if you think you can get them all tight evenly.
Tighten them down in steps and in a criss cross pattern until they bottom out and then just a tiny bit tighter.
This is only if your in a bind.
Every man should have a torque wrench period.
The springs will lock the bolts in place so your good there.
The main thing with the springs is your going into aluminum which will strip easy if you over tighten them and then you will need a new inner hub.
Don't over tighten them.

 

[blasterdemon7]

What is the torc spec?

 

[UniRacing]

5.5 pounds?

i think