What could the cause of this be? Also my tail light (yes, its a stock light) does not reach either side of my stock grab bar am I missing a extension or something?
Low Beams Dont Work & The Tail Light Wont Fit?
- Thread starter 2001BlasterKiid
- Start date
Low beams not working sounds as if there is something electrical wrong check all the wires that lead to the head light and insure that they are properly connected and that there is no bare wires as for the tail light im not to sure never had one
My headlight only shines on high beam, but that is likely due to wrong bulb. Your taillight attaches on each side to a rubber shock absorber piece, and those are what attach to the grab bar. If those are missing I suppose you can make some, or use some zip ties...or go to bikebandit dot com and order the exact parts.
not sure what happened to my post, the spacers resemble chain links, its a dual fillament bulb so check the high beam to see if its burnt out, also check the wiring for shorts and exposed wire
n my buddys 2001 blaster it has rubber shock obsorbers that attach to his grab bar and light so the light dosent break. mine was getto rig and was just bolted into my arir box.I:I
my low beam quit working a while back, then it got to where my light would only come on when if i revved it wide open then turned them on, now my headlight regulator is fried... your regulator might be going out as well but don't hold me to that.
