kx60 clutch problem

[camgarth1]

i got the kx60 running now but the clutch is not working now. i know the clutch plates are good because i just bought them not long ago. anyway the clutch worked before i added the oil. i put atf type f in the the clutch. is that bad?

 

[mud runner]

pull the cover off for the clutch and pull the clutch in and see if the pressure plate moves if it doesent your cable is broke or the clutch actuator is broke

 

[camgarth1]

pull the cover off for the clutch and pull the clutch in and see if the pressure plate moves

i cant do that with the kx because theres a push rod on the cover that pushes against the clutch

 

[mud runner]

ok pull in the clutch and see if the actuator moves if it doesent it is the cable if it does you are gonna have to ask someone else

 

[camgarth1]

ok pull in the clutch and see if the actuator moves if it doesent it is the cable if it does you are gonna have to ask someone else

the actuator moves when i pull the clutch lever in. im thinking the clutch plates are sticking together because of the oil.

 

[mud runner]

id pull the actuator out of it and if it has a chip out of it like this then u need a new one

 

[camgarth1]

id pull the actuator out of it and if it has a chip out of it like this then u need a new one

but if that was the problem,wouldnt it have failed to without oil in there? when i had no oil in the clutch cover it worked but i put the oil in there and didnt work after that.