Kill switch not working

X-Runner

New Member
Jul 17, 2008
122
3
0
Took the blaster down the road today only to get where I was going to find my kill switch no longer works. Headlight switch still works, all wires have good connection. I don't have a key switch so those wires are just hanging there taped up. Which wires (color) are for the kill switch and is this a common issue?
 
black and black with a wite stripe and idk if it is and the clamp has to have a good conection with the bars too but idk if that just for the head light or what
 
You should open your kill switch and take it apart, (carefully not to lose enny thing) then chek the actual button (that you use to turn the bike off). On the back of the switch is three contacts that are made from copper check that thay are not worn out... and then take it from there.