only having 3 bolts holding the clutch together is going to cause problems. I would say next step is to take the clutch basket off. get us more pics. A bit closer and straight on would be good this time.
Kickstart issues
- Thread starter nickster525
- Start date
how the heck is that the same quad as first pic?
your first pic shows a silver frame
your second pic shows a red frame?
is it your actual quad pic or whats up
never mind you are using it as a reference then your actual quad gotcha
here is the video's to prove that lol
Last edited:
Ok fellas I was going to remove my flywheel but when trying to break the bolt the flywheel spent and became free which resulted in my kick start to move again.
I've put it all together and my clutch handle is very soft no compression
I've put it all together and my clutch handle is very soft no compression
the piece that bolts on to the cylinder that holds the clutch cable
is it on right or on at all?
also if your quad locked up once...it will happen again you should really find out what happened
it will cost more in the long run
is it on right or on at all?
also if your quad locked up once...it will happen again you should really find out what happened
it will cost more in the long run
without looking at it and being there with you
i would say it is your crank rod lower bearing/or flywheel magnet is hitting stator
will it start at all??
by a ten dollar flywheel puller and take flywheel off,or have a shop or someone help you
you got to pay to play
i would say it is your crank rod lower bearing/or flywheel magnet is hitting stator
will it start at all??
by a ten dollar flywheel puller and take flywheel off,or have a shop or someone help you
you got to pay to play
your looking for a magnet that has fallen off and rubbing on other parts.
but i think your crank=part that connects to your piston is shot
