kfx400 rear mojave fronts

1bad240

New Member
Aug 17, 2010
74
1
0
coudersport pa.
Just put a kfx400 rear shock on my blasty, fit good, had to drill the bottom shock mount to fit the blasty pin, and a few custom spacers top and bottom and ended up with a good fit. have'nt tried it yet waiting for the mojave fronts to get here. should be tommorow. I didnt wanna try it till i have them all mounted up. then we will see how much of a difference there is between these and stock. i will post results.
 
mojave's on the front work great!!!!!!! fit with just a few washers to take up back and forward slop. smooth!!!! kfx works good also gotta back the preload down a little. u will need airbox mods for it. mine is missing the box so i had no problems. well worth the $19 i spent on the mojaves and $29 on the kfx. hope this helps someone else out. thanks,mike
 
  • Like
Reactions: sborns
i ran the kfx in the rear for a while till i snaped it in half due to my sh*tty welding on the shock tab on the +4 swinger. the shock on the stock length swinger was too stiff IMHO but i couldn't seem to get it to adjust to where i wanted it. with the +4 it was alot nicer but still a shade stiff but decent ride. if you want a real nice fit on the top mount talk to ken oconner bout his 400ex conversion bushings A+ fit. nice to see someone else run the kfx shock