Just Bought a Blaster - Need Help.

[Daft Punk]

Alright, So I just bought a '93 blaster and I don't really know anything about it. Yup, Im a noob. There's a few things I think I need help with. First off, it leaks oil.. I think it might be the gaskets. I also wanted to know, what kind of oil I should put in the crank case. Can I Use 4stroke oil.. Cause I've got lots left over from my last quad.

 

[specialized7]

use belray gear saver in the crankcase
where is it leaking oil?
around the clutch cover?
if so its really easy to change that gasket.
is it still oil injected or are you mixing your gas?

 

[Daft Punk]

It's still oil injected, and yeah it's leaking around the clutch cover.

 

[specialized7]

well its pretty easy to fix then,
First drain all the oil.
get a gasket from your dealer or off ebay there about 10 bux
if your gonna take the clutch cover off i would suggest taking off the oil injection pump at the same time.
but thats entirly up to you.
pull off your right foot peg, undo all the phillips screws, dont forget to take your kickstart off to.
no you should be able to pull the whole clutch cover off.
take a razor blade and scrapt eh old gasket material off the bottom end and the clutch cover.
install new gasket, and put clutch cover back on.
after you get all the screws and the kickstart back on.
fill it up with 650ml of belray.

 

[Daft Punk]

Alright, Thanks! Anyways, how do I disable the oil injection.. And whats the ratio of fuel/oil for premix afterwards?

 

[mr_3_0_5]

just get a block off kit it will come with the clutch cover gasket as well..
mix 32 to 1 ..

 

[specialized7]

Yea if you want you can buy the kit, its 30 or 40 bux but comes with a gasket and a oil block off plate.

you can make the oil block off plate easy enough if you have the tools and what not.
but to disable it, when you have the clutch cover off pull the plastic gear off the back and leave the shaft in there, this way you wont need a oil block off plate.
then cut the line going into the carb about 1" away and plug it with something(screw,silicone?)
then take all the oil injection junk off(tank,hoses)
Dont forget to drain your gas.
Mix 125ml 2 stroke oil with every gallon of gas.
that equals 32:1