is this borke???

[groundedracer]

I am having nothing but problems with this blaster but I was replacing th clutch today and I get it all off and back together but I have a question

is the small bolt in the center of the clutch supposed to come out mine did and it seems like its not supposed to

 

[groundedracer]

here are pics of the bolt Im talking about

 

[UncagedShadow]

there is suppose to be another cover that gous on before that nut and rod. Then the rod and nut slide through that and some springs and screws to go in those empty holes afterwards.

 

[groundedracer]

yeah I have that cover and the 5 springs but the middle nut goes onto that shaft and that shaft isnt conected to anything what I am asking is that stud supposed to come out like that or not

 

[88' blaster]

yeah I have that cover and the 5 springs but the middle nut goes onto that shaft and that shaft isnt conected to anything what I am asking is that stud supposed to come out like that or not

at the other end of that shaft goes in the the motor and hits a ball bearing that is between the other shaft coming from there the cable connects. (correct me if im wrong guys)

 

[groundedracer]

so is it normal to come out like that or is somthing broke

 

[88' blaster]

so is it normal to come out like that or is somthing broke

if im thinking what your thinking then yes its normal but the but put the nut on the end of that goes on the plate that you put the springs in (again correct me if im wrong)

 

[Surfrjag]

sounds about right.. OEM Parts Yamaha BLASTER (YFS200M) 2000 CLUTCH - Cheap Cycle Parts that shaft is #18 in this diagram . its supposed to move, when you pull the clutch it pushes this rod and is how you disenguage the clutch

 

[groundedracer]

ok thanks I have been going through the manual all day it looked ok by the book but I didnt want to put it back together til I knew thanks guys

 

[88' blaster]

ok thanks I have been going through the manual all day it looked ok by the book but I didnt want to put it back together til I knew thanks guys

no problem man. make your you get those plates all lined up right. they go in a certain way. i know i put them in wrong and my blaster would not go for sh*t