I have a aftermarket intake on my blaster, It uses a 2.5 inch hose. I am trying to find out what diameter a stock carb on a blaster is so I can get the correct reducer silicone hose. Thanks
Inatke Hoses
- Thread starter recruiter101st
- Start date
Wait a minute intake or airbox? Intakes should not be 2.5" on a blaster the airbox side can be.. and just take the Carb off and take it with you so you know you got a tight fit
Sorry the Airbox is 2.5 Inches. I know the Carb is 26mm. But I believe this to be the inside diameter not the outside diameter.
it is a 26mm carb you are correct that this is inside diameter it does not refer to intake size or outtake for that matter. I had just put measured pics in another thread, on a stock carb the outside diameter on the airbox side is 43mm the o.d. on carb side is 34mm it is stamped on carb manifold or you can simply measure